WELCOME DISTRIBUTORS APPLICATORS CONTACT

RUST-ANODE® PRIMER

Sizes availables: 2 and 12 kg

 

BENEFITS

  • Mono-component product
  • 99.995% pure organic zinc
  • Lower in VOCs than the strictest US standards (California)
  • Cathodic protection due to electrochemical bond with the metal (measurable [Ω resistance])
  • Easy to apply with standard painting equipment, including electrostatic
  • Required surface preparation: SSPC-SP7 or SSPC-SP6, or acid, depending on case
  • May be applied on non-friable rust, free of dust  
  • Can recharge existing zinc from hot galvanization; pressure washing with water is sufficient
  • May be covered with paint of your choice without surface preparation
  • Rust-Anode® Primer comes in only one colour: flat grey natural zinc.
  • An equal dry film thickness of Rust-Anode® Primer provides the same performance as hot galvanization and metallization
  • No structural distortion
  • Metal with Rust-Anode® Primer on can be welded without the release of toxic gases or flash.
  • Has anti-fouling properties ([anti-shelling] when immersed)
  • High resistance to saltwater and salty environments
  • May be applied to aluminium, concrete and existing paint after minimal cleaning
  • Resists hydrocarbons such as hydraulic fluid, diesel, gasoline, urea, etc.
  • Dries quickly (hygro-reactive) in moist environments
  • Can be used at any time to retouch Rust-Anode® Primer coated surfaces
  • Can be applied to moist surfaces at temperatures from -5°C to + 40°C
  • Meets ASTM B117 (Salt Spray Test), ASTM D522 (Mandrel Bend Test), CAN/CGSB 1-GP-71 Method 119.5 and CAN/CGSB 1.181 and Canadian Food Inspection Agency standards



















Copyright 2012 Galvatech2000™ Web Solutions terrainvirtuel.com