Rust Anode

Rust-Anode®

  • Benefits of Rust-Anode
  • Mono-component product
  • 99.995% pure organic zinc
  • Lower in VOCs
  • Cathodic protection due to electrochemical bond with the metal (measurable [Ω resistance])
  • Easy to apply with standard painting equipment
  • New steel, surface preparation required: SSPC-SP7 or SSPC-SP6, or acid, depending on case
  • Can be applied on non-friable rust, free of dust and grease.
  • Can recharge   existing zinc from hot galvanization; 
  • Rust-Anode® comes in only one colour: flat grey natural zinc RAL # 7001.
  • An equal dry film thickness   of Rust-Anode®  provides the same performance as hot galvanization and metallization
  • No structural distortion
  • Metal with Rust-Anode® on, can be welded through with less of the release of toxic gases or flash.
  • Has anti-fouling properties ([anti-shelling] when immersed)
  • High resistance to saltwater and salty environments
  • Dries quickly
  • Can be used at any time to reinforce Rust-Anode® coated surfaces
  • Can be applied at temperatures from –5°C and +37°C (23°F to +98°F)
  • Meets ASTM B117 (Salt Spray Test), ASTM D522 (Mandrel Bend Test), CAN/CGSB 1-GP-71 Method 119.5 and CAN/CGSB 1.181 and Canadian Food Inspection Agency standards

BENEFITS
Rust-Anode® Galvanization Technology

Hot galvanization Rust-Anode®
Active cathodic protection.
Zinc dry film thickness control.
Protection longevity.
Surface uniformity.
Minimal process time.
Recharging of existing zinc.
Minimal substrate preparation.
Weldability.
Touch up at any time.
Easy to apply.
Application with standard paint equipments.
Low energy consuming process.
No distortion of galvanized parts.
Salt-resistance.
Applicable on various metals.

  • On new steel
  • On rusty steel (brown):
  • On a new hot dip galvanization or metallization
  • On old hot dip galvanizing or metallization
  • On aluminum
  • On Copper
  • On cast iron and cast aluminum
  • On concrete
  • On corten steel
 

 









Health Canada approval.
Bending flexibility of galvanized parts.
Equivalent protection performance as hot dipped galvanized.
Process with No delay to your production schedule.

Chlor-rid

Remove chlorides, sulfates, nitrates and other soluble salt contaminants
Leaves no film or residue after use
Biodegradable, Water Soluble, Non-Toxic

Sherwin-Williams #8714
2525 RUE WATT LOCAL 1
SAINTE-FOY, QC G1P3T2 CAN

Phone: 418 656-6505
Fax: 418 656-4290

Web site: http://www.chlor-rid.com/productInfo/index.php#orangeSection

HoldTight® 102

Prevents Flash Rusting, Wet or Dry Blasted Surfaces
Removes All Surface Salts
Biodegradable, Water Soluble, Non-Toxic

Web site: https://www.holdtight.com/find-a-distributor.html (US Customers)

Web site: https://www.holdtight.com/product-overview.html (Canadian Customers)

Hold*Blast

Surface passivator
Prevent Flash Rusting, Wet or Dry Blasted Surfaces
Biodegradable, Environmentally safe

Sherwin-Williams #8714
2525 RUE WATT LOCAL 1
SAINTE-FOY, QC G1P3T2 CAN

PHONE: 418 656-6505
FAX: 418 656-4290

Web site: http://www.chlor-rid.com/holdblast/index.php

MULTICLEAN

A general purpose cleaning product.

Québec: 418 831-8808
Fax: 418 831-5055
Canada / USA: 1-888-SRS-SOLV

E-mail: info@srsenv.com

377 Rue Dupuy
Québec (QC)
G1L 1P2

Web site: http://produitsctc.com/produits/degraisseurs/ctc-102/

Metering pump

Salt test

Wet gage and electronic Gauge

Wet gage: used to measure the wet thickness of the applied product

Electronic Gauge: used to measure the dry thickness of the applied product
May be trying to hide the name of the company elcometer and defelsko

Refer to our technical support for more information

Top of page